New High Power® Xlr 4-pin 12v 5a 60w Video Camera Audio Pro Ac Adapter

  We are closed on Saturdays and Sundays. NEW HIGH POWER® 60W Energy-Efficient Fanless 4pin XLR Power Supply for Pro Video/Audio from JVC/ SONY/ PANASONIC ..... High efficiency design 88% minimum Low standby no load power consumption meeting CEC level VI Meets & exceeds original OEM specifications Input: 100-240V AC

Input AC Inlet: IEC 320 3pin (Type C14) compatible Output Voltage: 12V DC Ratings: 5A (60W) Continuous, 70W Peak DC Cable Length - 120cm DC Jack Type: XLR 4-Pin (compatible with JVC / SONY / PANASONIC)

High efficiency design with 88% minimum at normal line input and average of 25%, 50%, 75%, 100% of max load. Meet DOE CEC level VI No load Power Consumption :  Less then 0.21W Fanless AC adapter operates in total silence. UL, cUL, TUV, CE, FCC, CCC, KC, GS, CB, DOE VI, cTick, SAA Certified RoHS Compliant Technical Specifications: AC Input Voltage Maximum Voltage: 264Vac Normal Voltage : 100~240Vac Minimum Voltage: 90Vac AC Input Frequency Maximum Frequency: 63Hz Normal Frequency: 50~60Hz Minimum Frequency: 47Hz Input Current: 1.2A (Max.) @ 115Vac input will full load 0.6A (Max.) @ 230Vac input will full load DC Output Power: 5A (60W) Continuous, 70W Peak High efficiency design with 88% minimum at normal line input and average of 25%, 50%, 75%, 100% of max load.  Meet CEC level VI No load Power Consumption :  Less then 0.21W Inrush Current (cold start) : 30A Max. @110Vac/60Hz;   60A Max. @230Vac/50Hz AC Leakage Current: 0.25mA Max. @240VAC input. Line Regulation: This line regulation is less than ± 5%, of rated output voltage@ full load Minimum Load: 0.0A Hold Up Time: ≧ 5mSec., @ 115V AC input line, with full load. Rise Time: ≦40 milli-second @ 115V AC input with full load - from 10% to 90% of output voltage. Turn on Delay Time: The output voltage should rise to 90% of rated output voltage in less than 3 second from 115V AC applied to start up. Over voltage protection Short circuit protection Over Voltage Protection 100% HI-POT tested: IEC 320 3pin primary to secondary 1800Vac 5mA 1min 100% cycling BURN-IN under 80% load for 2 hours 12V DC output @  +- 5% Standard Deviation 120mV Maximum Ripple Voltage Operating temperature:  0 - 50 degree C Storage temperature: -20 - 80 degree C

Humidity : Operating -  10 to 90 %;  Storage - 5 to 90 % Altitude :  Operating - From sea level to 2,000-Meter ; Storage - 5,000-Meter MTBF : > 50,000 hours at full load under 25 degree C ambient condition Standard US 3-pong AC Inlet IEC 320 3pin (Type C14) compatible Standard US computer 3-prong AC power cord compatible Ground pin included for extra safety over 2-prong design Built-in power status indicator Blue LED turns steady on when there is a reliable 12V DC output. LED flashes when there is a problem found by the internal detection circuitry. LED turns off when there is no power output or no power input. DC cable: 20AWG, 1200mm total length Case dimensions: 110mm ( Length)/ 45mm (Width)/ 26mm ( Height) Safety compliance: UL, cUL, TUV, CE, FCC, CCC, KC, GS, CB, DOE VI, cTick, SAA Dimensions: 110 (L) * 45 (W) * 26 (H)  mm RoHS Compliant - made with hazardous-free components RoHS is the Restriction Of the use of certain Hazardous Substances in electrical and electronic equipment. This has been a standard in Europe and is now becoming a standard in the world. Not only lead, but cadium, mercury, hexavalent chromium, polybrominated biphenyl (PBB), and polybrominated diphenyl ether (PBDE) flame retardants are limited as well. Lead- FREE Cadium- FREE Mercury- FREE Hexavalent chromium- FREE PBB- FREE PBDE flame retardants- FREE (More on Shipping/ Return Policy / None-USA International Customers)

Returns Accepted for this item if it's within 30 Days