Milwaukee M18 Battery Power Mount Connector Adapter

This is a 3D printed battery connector with counterbored bolt holes for mounting, use up #8 or m4 socket head bolts. It comes with 2 1 foot sections of high quality southwire 12 awg stranded 100% copper Machine wire rated (MWR), wire has the dual THHN/THWN rating, along with gasoline, oil, 600v, ul, and rohs stamped on its nylon jacket. Red wire connects to the positive battery terminal, and black connects to the negative battery terminal. Battery, drills, terminal blocks, and meter not included. I have also found out you can connect batteries in parallel and/or series. DISCLAIMER THESE UNITS DON'T HAVE ANY PROTECTION CIRCUITS IN THEM, USE AT YOUR OWN RISK. ALSO THESE ARE FOR LIGHT DUTY, INDOOR USE. IF YOU LEAVE THEM OUTSIDE THEY WILL WARP, AND IF YOU'RE TOO HARD ON THEM THEY WILL BREAK. This is version 4.0 which improved: fitment, battery latching, ergonomics , and strength. Check out my Ebay store here: https://www.Pricetronic.com/str/americannigel If you dont want to over discharge your battery use a low voltage disconnect If you want lower voltage like 5 or 12 volts use a buck converter If you want higher voltage like 24, 36, 48, or 60 volts use a boost converter