X New Adapter
For Dewalt Flexvolt 60v Max Battery Dock Power Connector X Gauge
USD $16.50
Condition : New
Free Shipping
{{variant_type_name}} :
Notify me when the price drops
We will email you if we find a lower price on this product!
Includes 1 black DeWALT 60V Max (54 volt) Flexvolt battery adapter
Available Options:
Option 1: 12 gauge 10 inches
Option 2: 10AWG 12 inches, marine grade tinned copper, UL rating exceeded Battery Not Included
Note: this latest design no longer exposes the jumper loop, if you still prefer the old design see listing here: https://www.ebay.com/itm/144286644323 Note:This is not a charger or converter, it only outputs battery voltage and power directly from your battery. Note: All battery adapters are designed and manufactured by Terrafirma Technology and are compatible for use with batteries manufactured by other brands. We are not affiliated with DEWALT ®, MILWAUKEE®, RYOBI®, KOBALT®, Porter Cable® and/or any other brands. Warning: To use this adapter properly, we recommend using a fuse thats rated about 30% higher than the max current you expect to draw. We also recommend adding a low voltage disconnect circuit or a timer to prevent the battery from dropping past low voltage threshold (which will damage the battery or shorten its life span); (Max battery voltage/4.2)*3.3 = typical low voltage threshold. To protect your device you should convert your voltage using a DCDC converter to match your device's acceptable voltage range. We do not recommend buying our adapters without fully understanding how to use it properly, protect the battery, and the device you intend to power.
This adapter is wired to only output 60Volts when connected to Flexvolt batteries, if you need the 20volt version check my eBay store for the 20volt adapter. This battery adapter/connector has been tested to work with DeWALT 60volt flexvolt batteries. Including models: DCB606 and DCB118X1
All battery adapters are now made with heat, impact and chemical resistant materials
Rev d1.1:
08/25/2017
first tested release version, designed as a modified version of 20volt adapter, tested to output 60volts when plugged in to 60volt battery.
Rev d1.4
major structural change, improved strength
D3 2020
Improved pin spacing, improved manufacturing look, machine crimped for consistent terminal to wire quality
version A October 2021
integrated PCB, hides the previous loop design inside adapter, improved tolerances on adapter, stronger wire latch and added strain relief for wires. [isdntekvideo]
Available Options:
Option 1: 12 gauge 10 inches
Option 2: 10AWG 12 inches, marine grade tinned copper, UL rating exceeded Battery Not Included
Note: this latest design no longer exposes the jumper loop, if you still prefer the old design see listing here: https://www.ebay.com/itm/144286644323 Note:This is not a charger or converter, it only outputs battery voltage and power directly from your battery. Note: All battery adapters are designed and manufactured by Terrafirma Technology and are compatible for use with batteries manufactured by other brands. We are not affiliated with DEWALT ®, MILWAUKEE®, RYOBI®, KOBALT®, Porter Cable® and/or any other brands. Warning: To use this adapter properly, we recommend using a fuse thats rated about 30% higher than the max current you expect to draw. We also recommend adding a low voltage disconnect circuit or a timer to prevent the battery from dropping past low voltage threshold (which will damage the battery or shorten its life span); (Max battery voltage/4.2)*3.3 = typical low voltage threshold. To protect your device you should convert your voltage using a DCDC converter to match your device's acceptable voltage range. We do not recommend buying our adapters without fully understanding how to use it properly, protect the battery, and the device you intend to power.
This adapter is wired to only output 60Volts when connected to Flexvolt batteries, if you need the 20volt version check my eBay store for the 20volt adapter. This battery adapter/connector has been tested to work with DeWALT 60volt flexvolt batteries. Including models: DCB606 and DCB118X1
All battery adapters are now made with heat, impact and chemical resistant materials
Rev d1.1:
08/25/2017
first tested release version, designed as a modified version of 20volt adapter, tested to output 60volts when plugged in to 60volt battery.
Rev d1.4
major structural change, improved strength
D3 2020
Improved pin spacing, improved manufacturing look, machine crimped for consistent terminal to wire quality
version A October 2021
integrated PCB, hides the previous loop design inside adapter, improved tolerances on adapter, stronger wire latch and added strain relief for wires. [isdntekvideo]
Returns Accepted for this item if it's within 30 Days
Price type
IN STOCK
OUT STOCK
.
